About this course
Welding Supervisors play a vital role in industry, they understand the factors that influence welding quality, how to oversee welders effectively, and the variables that help maximise productivity.
The AS1796 Certificate 10 meets the requirements for a welding supervisor under AS 1210 for pressure vessels. Similarly, this qualification also meets the requirements outlined in AS/NZS 1554.1 to supervise the welding of structural steel.
Prerequisites
AS 1796 Welding Supervisor
To sit for AS1796 Certificate 10 Welding Supervisor, candidates need to provide evidence of completion of a practical course in welding (e.g. MMAW, GMAW, FCAW, GTAW), Thermal heating and gouging and one of the following:
a) Hold an AS 1796 Welding Certificate (1–9) and have a minimum of one year’s post-certification experience welding pressure equipment as defined in AS/NZS 1200.
b) A welding certification in accordance with AS3992 or similar and have not less than two years’ experience welding pressure equipment, as defined in AS/NZS 1200.
c) A qualification in engineering, metallurgy, or welding, with at least three years’ welded fabrication experience, including one year on pressure equipment (AS/NZS 1200).
Online Course Delivery
The Welding Supervisor online course includes three x five-week modules with two x three hour lectures per week, delivered over six months. A minimum attendance rate of 70% is required. The course includes a mixture of pre-recorded material, live online lectures, and a variety of other learning resources. All our presenters are AS 1796 Certificate 10 qualified or higher with extensive industry experience.
|
MODULE |
DATE RANGE |
|
|
Welding Theory & Technology – Part 1 |
20/01/2027 – 18/02/2027 |
|
|
All lectures are on a Wednesday and Thursday via Zoom at 9:30am - 11:30am AEDT |
Week 1 – 20 & 21/01/2027 |
|
|
Week 2 – 27 & 28/01/2027 |
||
|
Week 3 – 03 & 04/02/2027 |
||
|
Week 4 – 10 & 11/02/2027 |
||
|
Week 5 – 17 & 18/02/2027 |
||
|
Welding Theory & Technology – Part 2 |
03/03/2027 – 01/04/2027 |
|
|
All lectures are on a Wednesday and Thursday via Zoom at 9:30am - 11:30am AEDT |
Week 1 – 03 & 04/03/2027 |
|
|
Week 1 – 10 & 11/03/2027 |
||
|
Week 1 – 17 & 18/03/2027 |
||
|
Week 1 – 24 & 25/03/2027 |
||
|
Week 1 – 31/03 & 01/04/2027 |
||
|
Application of Standards |
14/04/2027 – 06/05/2027 |
|
|
All lectures are via Zoom on a Wednesday and Thursday |
AS2214 |
AS1796 |
|
Week 1 – 14/04/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 1 – 15/04/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 2 – 21/04/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 2 – 22/04/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 3 – 28/04/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 3 –29/04/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 4 – 05/05/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
|
Week 4 – 06/05/2027 |
9:30 – 11:30 AEST |
12:30 – 14:30 AEST |
Topics covered
Module 1
- General
- Welding Safety
- Welding, cutting and related processes
- Welding Equipment
- Welding Practice
- Welding Production
- Welding Inspection and testing
Module 2
- Introduction of steel
- Phases of material transformation and alteration
- Mechanical properties and heat treatment
- Steel composition and weldability
- Cracking phenomena
- Stainless steel
Module 3
- The implementation of the welding requirements in the appropriate Australian Standards for pressure equipment as defined in AS/NZS 1200
Course modules
Book the complete course, or choose only the modules you need and pay for those.
Best value
Book the complete course
AU$ 5,850 inc. GST Save AU$ 165 against booking modules separately
Book the complete courseor choose individual modules